Filter
Top Products
5. Advanced Setup
5-28 August 2005 6211-A2-GB21-30
DSL Advanced Settings
Do not change the DSL Advanced Settings unless so directed by your ISP. To view
the DSL Advanced Settings screen, click on the Advanced Settings button on the
DSL Settings screen (see Figure 5-37).
There are five test modes between the router and your ISP:
Normal test: Puts the router in a test mode in which it only sends a Normal
signal.
Reverb test: Puts the router in a test mode in which it only sends a Reverb
signal.
Medley test: Puts the router in a test mode in which it only sends a Medley
signal.
No Retrain: In this mode the router will try to establish a connection as in
normal mode, but once the connection is up it will not retrain if the signal is
lost.
L3: Puts the router into the L3 power state.
Figure 5-38. DSL Advanced Settings