Filter
Top Products
7. Management
6211-A2-GB21-30 August 2005
7-9
Configure System Log
If the log is enabled, the system will log selected events: Emergency, Alert, Critical,
Error, Warning, Notice, Informational, and Debugging. All events above or equal to
the selected log level will be logged and displayed.
If the selected mode is "Remote" or "Both", events will be sent to the specified IP
address and UDP port of a remote system log server. If the selected mode is
"Local" or "Both", events will be recorded in the local memory.
Figure 7-12. System Log Configuration
Select the desired values and click on the "Save/Apply" button to configure the
system log options.