Filter
Top Products
6212-A2 and 6382-A1 ADSL Router User’s Guide
5. Select the VPI and VCI settings. Your service provider will supply these. In this example the service
provider is using 0,35.
6. Select the quality of service (QOS); leave the default value if your ISP did not provide this information.
7. If desired, enable Network Address Translation (NAT) and the Firewall options. If you are unsure, leave
these in the default mode.
8. Based upon the information your DSL/ISP provided, enter your assigned IP address, Subnet Mask,
Default router (if provided), and Domain Name Services (DNS) values (if provided). For the static
configuration, you can also select a bridge connection or a routed connection. Since static IP address is
typically used to host web servers, you may want to use a bridge connection.
Figure 8 (Static IP Connection Setup)
Click on the Apply button. The Apply button will temporarily save this configuration. To make the change
permanent, click on Tools (at the top of the page) and select System Commands. At the system commands page,
click on Save All.
4.4.3 Modify an Existing Connection
To modify an existing connection:
From the Home screen, click on Setup, and then click the connection you want to modify. The connections are
listed as Connection 1 through Connection 8.
If you delete the connection, to make the change permanent you need to click on Tools (at the top of the page) and
select System Commands. At the system commands page, click on Save All.
28