Filter
Top Products
4. Monitoring the Hotwire DSL System
8000-A2-GB26-50 April 2001
4-15
Table 4-3. Monitor Interfaces Options
Active List (Active Interfaces List) B-C-A
Displays a list of the current status of all of the active interfaces in the card.
Num
– Number of the interface.
Intf Name
– Name of the interface (for example, eth1:1, sar1:1, dsl1:1 through dsl12:1 for
12-port cards, etc.).
Type
– Interface type (static).
Link
– Name of the protocol on the interface.
State
– Current state of the interface.
ll-state
– Not applicable.
Port Name
– Port linked to this interface.
The only information that changes on this screen is the state (active or port-wait) column.
Status (Interface Status) B-C-B
Displays a list of additional information, after a specific interface (port) has been selected.
Interface Name
– Name of the interface (for example, eth1:1, sar1:1, dsl1:1 through
dsl12:1 for 12-port cards, etc.).
protocol
– Type of protocol for the entered interface name.
port
– Port linked to this interface.
restarts
– Number of times interface has been restarted.
user
– None.
type
– Static.
link-downs
– Number of times the link has gone down.
state
– Active or prtwait.
inactivity T/O
– Number of times the interface has timed out.