Filter
Top Products
5. Security
5-6
March 2001 3160-A2-GB24-10
The inactive interface displays the following message after control has been
released from the previously active interface and another interface has not
become active.
Releasing the Active User Interface
To release the current active user interface, either allow five minutes to elapse
without pressing any key or use the Release command.
Procedure
To use the Release command:
1. From the top-level menu screen, press the key until the Ctrl selection
appears on the screen.
2. Select Ctrl.
3. From the Control screen, select Rel (Release).
The active user interface is released. The message
Released
appears. No
user interface is active until input is received from a user interface.
F1
F2 F3
DSU ESF
User I/F
idle
F1
F2 F3
Control:
Call Rel LED