Filter
Top Products
4. Configuration
4-42
March 2001 3160-A2-GB24-10
Configuring for Network Timing
Procedure
To configure for network timing:
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the key until the Gen selection appears on the
screen.
5. Select Gen.
6. Press F1 (Next) to display the next configuration option (Clock Src).
7. Select the master clock source. For network, press F2 (note that network is
also the default).
F1
F2 F3
Edit:
NET Chan Gen
F1
F2 F3
Clock Src:NET
Next NET DTE