Filter
Top Products
Monitoring
6-26
9820-A2-GB20-20
June 2000
IP Routing Table (Model 9820-45M)
The IP Routing Table display is selected from the Status menu.
Main Menu
→
Status
→
IP Routing Table
IP Routing Table Screen Example
main/status/connections 9820-45M
Device Name: Node A 05/13/2000 5:07
Page 1 of 2
IP ROUTING TABLE
Destination Mask Gateway Hop Type Interface TTL
135.001.001.000 255.255.255.000 135.026.001.254 1 Tmp PVCMgmt1001 130
135.001.002.111 255.255.255.255 135.026.001.254 1 NMS PVCMgmt1002 130
135.001.220.000 255.255.255.000 135.042.001.254 1 Loc Ethernet 999
135.001.221.000 255.255.255.000 135.042.001.254 2 Loc Modem 999
135.001.220.010 255.255.255.000 135.042.001.254 1 Loc COM 999
135.001.222.000 255.255.255.000 135.026.001.254 1 RIP Modem 30
135.001.001.010 255.255.255.255 135.026.001.254 1 RIP PVCMgmt1003 30
135.001.001.011 255.255.255.255 135.026.001.254 1 NMS PVCMgmt1004 2
135.001.001.012 255.255.255.255 135.026.001.254 1 NMS PVCMgmt1005 48
135.001.001.013 255.255.255.255 135.026.001.254 1 NMS PVCMgmt1006 21
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
ESC for previous menu M
ainMenu Exit
R
efresh PgUp PgDn
Table 6-16. IP Routing Table (1 of 2)
Field
What It Indicates
Destination The IP address of the route.
Mask The subnet mask of the route.
Gateway The network gateway IP address for the route.
Hop The number of hops to the destination for the route.
Type The method that was used to add the route:
RIP – The route was discovered through RIP.
Loc – The route was added as part of the unit’s configuration.
NMS – The route was added by an NMS using SNMP.
Tmp – The route was added as a temporary route to answer an
IP packet that was received. The route is deleted when its TTL
expires or when the unit is reset.
– (Hyphen) – The source of the route is not maintained in the
table.