Filter
Top Products
6382-A2-GB20-00 April 2005 3-1
3
Using the Web Interface
Logging Into Your Router
To configure your router, open your web browser. Ignore any error about lacking a
connection. Type the default IP address (192.168.1.1) into the Location field of
your browser and press the Enter key. The following screen appears.
Figure 3-1. Login Screen
The default user name is Admin and the password is Admin. Both are
case-sensitive.
Note: Before configuring your router, make sure you have followed the instructions
in Chapter 2, Hardware Installation and PC Setup. You should have your PCs
configured for DHCP mode (if your router will be), and have proxies disabled on
your browser. If you see a login redirection screen when you access the web
interface, verify that JavaScript support is enabled in your browser. Also, if you do
not get the screen shown in Figure 3-1, you may need to delete your temporary
Internet files.