Filter
Top Products
3. Using the Web Interface
3-4 April 2005 6382-A2-GB20-00
Figure 3-5. Quick Start - Static
Enter or select Quick Start options as shown in the following table.
Click on Save to make the changes permanent.
Table 3-1. Quick Start Options
Field Description
NAT Click in the check box to activate Network Address Translation
(NAT). See Appendix A, Ter mino logy , for a description of NAT.
Firewall Click in the check box to activate the firewall. See Appendix A,
Terminology, for a description of a firewall.
Username (PPPoE) Enter the user name given to you by your service provider.
Password (PPPoE) Enter the password given to you by your service provider.
IP Address (Static) Enter the IP address to be assigned to the router.
Mask (Static) Enter the subnet mask to be applied to the IP address.
Default Gateway (Static) Enter the IP address of a default gateway. Packets for which
the router has no appropriate route are sent to the default
gateway.
DNS 1–3 (Static) Enter the IP address of the primary domain name server, and
optionally the addresses of a secondary and tertiary DNS to
be used if the server before it is unavailable.