18
Modem Port
Select Modem Port to configure the FrameSaver unit’s Modem port.
Modem Port
Configuration Option Settings Default in [Bold]
Port Use [Terminal], Net Link
When Port Use is set to Terminal:
Dial-In Access [Enable], Disable
Login Required Enable, [Disable]
Port Access Level [Level-1], Level-2, Level-3
Inactivity Timeout [Enable], Disable
Disconnect Time (Minutes) 1–60 [10]
When Port Use is set to Net Link:
Dial-In Access [Enable], Disable
IP Address 001.000.000.000–223.255.255.255, [Clear]
Subnet Mask [000.000.000.000]–255.255.255.255, Clear
Link Protocol [PPP], SLIP
Alternate IP Address 001.000.000.000 –223.255.255.255, [Clear]
Alternate Subnet Mask [000.000.000.000]–255.255.255.255, Clear
RIP [None], Proprietary, Standard_out
Auto Backup Criteria
Select Auto Backup Criteria to control when automatic backup will take place.
Auto Backup Criteria
Configuration Option Settings Default in [Bold]
Auto Backup Enable, [Disable]
When Auto Backup Allowed [Always], Restrict
Backup Allowed From Monday–Sunday, [00:00] –23:00
Backup Allowed To Monday–Sunday, 00:00 –[24:00]