Filter
Top Products
7
Data Ports
Select Data Ports, then Physical to configure physical characteristics for the port
connected to the DTE.
Data Ports
Configuration Option Settings Default in [Bold]
Port Status [Enable], Disable
Port Use (Port-2 only) [Frame Relay], Synchronous Data
For Port-1 or when Port Use is set to Frame Relay on Port-2:
Max Port Rate (Kbps)
(Port-2 only)
[1536], 2048
Invert Transmit Clock [Auto], Enable, Disable
Transmit Clock Source [Internal], External
Monitor DTR [Enable], Disable
Monitor RTS (Control) [Enable], Disable
Port (DTE) Initiated Loopback [Disable], Local, Both
When Port Use is set to Synchronous Data on Port-2:
Port Base Rate (Kbps) [Nx64], Nx56
Invert Transmit Clock [Auto], Enable, Disable
Transmit Clock Source [Internal], External
Monitor DTR [Enable], Disable
Monitor RTS (Control) [Enable], Disable
Port (DTE) Initiated Loopback [Disable], DTPLB, DCLB, Both
Invert Transmit and Receive Data Enable, [Disable]
Action on Network Yellow Alarm None, [Halt]
Network Initiated
Data Channel Loopback
[Disable], V.54, ANSI_FT1, V.54_&_ANSI