Filter
Top Products
Storing 22
NanoServ™ User Manual 5 • Taking Care Of Your NanoServ™
Storing
• Do not place your NanoServ™ in a location that is subject to:
- Heating sources, such as a stove, oven, heater, radiator or air duct
- Direct contact from sunlight
- Rain or moisure
- Excessive dust accumulation
- High humidity
- Constant or occasional mechanical movement, vibration or shock
- Strong magnets, magnetic fields or magnetically unshielded speakers
- Ambient temperature of more than 95ºF (35ºC) or less than 32ºF (0ºC)
•
Do not place other electronic devices or electronic equipment near your NanoServ™.
The electromagnetic field of the NanoServ™ may cause interference subjecting the unit to malfunction.
- Provide adequate air ventilation (circulation) to prevent internal buildup of heat. Do not place your
NanoServ™ near the wall, behind the curtains or draperies, or in between two books that block its venti-
lation slots.
- Leave a space of at least 8 inches (20cm) around the sides and the back panel of the NanoServ™.
•
Change of environmental temperature: Problems may occur when there is a sudden change of
environmental temperature. If the NanoServ™ is brought directly from a cold location to a warm one,
moisture may condense inside the unit. Allow time for the system to reach normal temperature before use.
•
Checking the surrounding appliance(s) before using your NanoServ™: Because the
NanoServ™ uses a high-frequency radio signal, it may interfere with radio or TV reception causing inter-
ference or poor signal display. When this happens, move the NanoServ™ to a suitable distance away from
the set.
•
Do not drop the NanoServ™ from the working table or place heavy objects on top of
the NanoServ™.