Filter
Top Products
Using cables for connection 23
NanoServ™ User Manual 5 • Taking Care Of Your NanoServ™
Using cables for connection
• To avoid problems, use only the specified interface cables that match the system. The supplier will not be
responsible for problems caused by improper connection with other devices or cables.
• Do not use cut or damaged cables to connect devices to the NanoServ™.
Cleaning your NanoServ™
• Clean the NanoServ™ with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solu-
tion.
• Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may
damage the finish of your NanoServ™.
• When a solid object falls or a liquid spills onto the NanoServ™, turn off the unit immediately and unplug
the 10/100 Ethernet and power cables. Contact a qualified person or your dealer to check the NanoServ™
before you use it again.
• Always disconnect the power cord from the power source before cleaning the NanoServ™.
The Interconnecting cables shall be acceptable for external use and shall be
rated for the proper application with respect to voltage, current, anticipated
temperature, flammability, and mechanical serviceability