Filter
Top Products
Troubleshooting your system 26
NanoServ™ User Manual 6 • Troubleshooting
C. “Operating System Not Found”
- A message indicating that “Operating system not found” appears when the NanoServ™ starts (Win-
dows won’t start).
- Often this message says that an unformatted blank hard disk or blank IDE flash module is installed.
In this case, there is no problem, just load your desired operating system on the disk or flash.
Enter your BIOS setup main menu by pressing the <DEL> key. (Be sure that your C: drive is enabled).
If Windows still does not start, follow these steps to initialize the BIOS:
– 1. Turn off the NanoServ™.
– 2. Remove any peripheral devices connected to the NanoServ™.
– 3. Restart the NanoServ™.
– 4. Press <DEL> to enter BIOS Setup main menu window.
– 5. Follow the steps as written in item, “B. BIOS Error Message” on page 25.
• If you have just connected your NanoServ™ to a CDR or Floppy disk, remove these peripherals. Restart
the NanoServ™ to confirm that the Windows operating system starts properly.
• If the NanoServ™ continues to display the message ”Operating system not found,” and Windows does not
start, please verify that your system came with a disk or flash, and that it is formatted, and that it contains a
valid operating system.