Filter
Top Products
7
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product. This
product has been thoroughly inspected and tested and is warranted for
one year for parts and labor. If any questions or problems arise during
installation or use of this product, contact Patton Electronics Technical
Support at +1 (301) 975-1007.
2.1 FEATURES
• VDSL2 - Easy to configure
• Auto-MDIX Ethernet
• Configurable 10/100, Full/Half, and Auto-Negotiating Ethernet
• Extends up to 4x 10/100Base-TX Ethernet beyond 328-foot (100-
meter) limitation over a single twisted-pair or Cat5+
• Symmetric or asymmetric settings
• POTS/ISDN splitter on board
• Transparent operation
• LED indicators for Power, DSL Link, Ethernet Link/Activity, Remote and
Local
2.2 DESCRIPTION
The Patton Electronics Model 1069 OnSite CPE provides high-speed
VDSL2 connections to any standards-based VDSL2 DSLAM.
The Model 1069 can automatically forward LAN broadcasts, multicasts,
and frames across a 2-wire voice-grade twisted-pair link. The data is
passed transparently (unmodified) through the 1069. The 1069 automati-
cally adds and deletes MAC addresses, only passing packets across the
VDSL2 link.
Figure 1 on page 8 describes the rear panel ports on the Model 1069
VDSL CPE.