Filter
Top Products
9
3.0 INSTALLATION
To connect the Model 1069, do the following:
1. Connect the Line port of the Model 1069 with a telephone cable
(refer to section 3.1, “Connecting the Line Interface” on page 10).
2. Connect an Ethernet port to the network card of a PC via an Ether-
net cable (refer to section 3.2, “Connecting the 10/100Base-T Ether-
net Interface” on page 11).
3. Connect the Power plug to the wall outlet (refer to section 3.4, “Con-
necting Power” on page 12).
Figure 3 displays the connections of the unit to a PC, telephones, DSL
outlet, and power outlet.
Figure 3. Model 1069 connection diagram
The Interconnecting cables shall be acceptable for
external use and shall be rated for the proper applica-
tion with respect to voltage, current, anticipated tem-
perature, flammability, and mechanical serviceability.
CAUTION
POTS/ISDNLineEth0 Eth1 Eth2 Eth3Power