Filter
Top Products
9
3.0 INSTALLATION
Because the CopperLink Ethernet Extenders require no configuration, they
can be installed quickly. Installation consists of the following:
• Connect the line interface between the units (refer to section 3.1,
“Connecting the Twisted-Pair Line Interface” on page 10)
Note
See Figure 2 for the rear-panel connectors locations.
• Connect the Ethernet interface (refer to section 3.2, “Line Interface—
Connecting the 10/100Base-T Ethernet Interface” on page 11).
• Connect the power plug (refer to section 3.3, “Connecting Power” on
page 12).
Figure 2.
CopperLink Ethernet Extender rear panel
The Interconnecting cables shall be acceptable for
external use and shall be rated for the proper applica-
tion with respect to voltage, current, anticipated tem-
perature, flammability, and mechanical serviceability.
CAUTION
CopperLINK
twisted-pair
RJ-45 interface
2157R
Power
jack
Ethernet
port
Console
MDI-X
switch