Filter
Top Products
2
Model 2292/2294 Quick Start Guide
1.0 Installing the SmartNode extender
1.1 Mounting the SmartNode extender
Place the extender on a desktop or similar sturdy, flat surface that offers easy access to the cables. The extender
should be installed in a dry environment with sufficient space to allow air circulation for cooling.
For proper ventilation, leave at least 2 inches (5 cm) to the left, right, front, and rear of the SmartNode
extender.
1.2 Connecting cables
Install the cables in the following order:
1.
Installing the RJ-11 voice port cable or cables
(see
1.3 “Installing an interface cable on the extender’s voice ports”
on page 3)
• This device contains no user serviceable parts. The equipment shall be
returned to Patton Electronics for repairs, or repaired by qualified
service personnel.
• Mains Voltage: Do not open the case when the power cord is con-
nected. For systems without a power switch, line voltages are
present within the power supply when the power cord is connected.
• The external power adapter shall be a listed Limited Power Source.
Ensure that the power cable used meets all applicable standards for
the country in which it is to be installed, and that it is connected to a
wall outlet which has earth ground. The mains outlet that is utilized
to power the devise shall be within 10 feet (3 meters) of the device,
shall be easily accessible, and protected by a circuit breaker.
• Hazardous network voltages are present in WAN ports regardless of
whether power to the SmartNode is ON or OFF. To avoid electric
shock, use caution when near WAN ports. When detaching cables,
detach the end away from the SmartNode first.
• Do not work on the system or connect or disconnect cables during
periods of lightning activity.
• Before opening the chassis, disconnect the telephone network cables
to avoid contact with telephone line voltages.
• Do not work on the system or connect or disconnect cables during
periods of lightning activity.
• The Interconnecting cables shall be acceptable for external use and
shall be rated for the proper application with respect to voltage, cur-
rent, anticipated temperature, flammability, and mechanical service-
ability.
WARNING
WARNING