Patton electronic 2996 Server User Manual


 
Maintenance 59
Model 2960/2996 RAS User Manual 5 • Troubleshooting and maintenance
3. Set up HyperTerminal™ as follows:
Open a HyperTerminal session.
Enter a name for this connection.
–Click on the Connect using: pop-up menu and choose the Direct to ComX option (where X is the number
of the COM port onto which you connected the cable in step
1) (see figure 40).
Figure 40. HyperTerminal properties
Configure the COM port settings as shown in figure 41.
Figure 41. COM properties