Filter
Top Products
Model 3088/I Quick Start Guide
5
3.0 Connect to the local IP network
Now you can connect the RocketLink-G NTU to your local IP network and complete the remaining configuration
from your PC using a standard web browser.
Connect the RocketLink-G NTU’s
Ethernet
port (green) to the same Ethernet segment as your PC (see
figure 3
).
The front-panel
Ethernet Link
LED should turn on. If it does not, press the rear-panel MDI-X switch so that the
Ethernet Link
LED illuminates.
You can check the connection with the ping command. For example shown in
figure 3
, you would ping
10.10.4.10 from a PC on the IP network.
Figure 3.
Connecting the RocketLink-G to the local IP network (Model 3088/I shown)
M
D
I
-
X
L
in
e
E
t
h
e
r
n
e
t
P
o
w
e
r
C
o
n
s
o
l
e
Connect to Ethernet port
Ethernet port
PC
MDI-X switch