Filter
Top Products
Introduction 47
Model 3088A Series Getting Started Guide 5 • Remote console operation
Note
The local or remote 3088A may be CO or CPE, as long as there is one of
each. Either the CO or CPE unit may accept a remote console connection.
Note
With a remote console session open, a user at PC (far-end) is blocked from
using the local console. Upon typing anything, the 3088A (far-end) sends a
message to the PC (far-end) stating Console: Remote console connection is open.
Figure 17 is a screenshot of opening a typical remote console session:
Figure 17. Opening a typical remote console session
How to Disconnect
The remote console session ends under any of the following conditions:
• The user enters the command logout
• A timeout period of 5 minutes elapses since the user has entered a command to the console.
• The DSL link drops.
Log in to 3088 (Near End)
system show status command
shows that DSL link is not up
remote console command requests a
remote console session on 3088 (Far End)
Message informs us that the 3088 (Far End) did not
respond and a remote
console session was not opened
system show status command shows
that the DSL link state is success
remote console command requests a
remote console session on 3088 (Far End)
Message informs us that we are now
connected to the 3088 (Far End) console
We can now enter commands on
the remote console