Filter
Top Products
Auto Upgrade 78
SmartLink 4020 Getting Started Guide 7 • System
SNMP Community Configuration
Read Community
The community name used by the SNMP manager when reading SNMP data items from a client MIB. The
default value is public.
Write Community
The community name used by the SNMP manager when setting SNMP data items in a client’s MIB. The
default value is public.
SNMP System Configuration
System Description
Description of the unit (e.g. “John’s phone”)
System Object Id
A vendor’s enterprise ID
Saving your work
When you are finished configuring settings, click the Save SNMP Settings button to save the changes.
Auto Upgrade
The Smartlink 4020 family includes a configuration and firmware download manager server that allows for the
updating of large numbers of SmartLink 4020s from a central location. By factory default, all SmartLink 4020
units are set with auto-update on and to access the Patton auto-update server. Many of Patton’s carrier cus-
tomers have chosen to setup their own auto-update server to provide service specific information for their end
users. Patton recommends that end users do not change the auto-update server or set “Enable auto-upgrade” to
“NO” without consulting with their service provider.
Figure 52. AutoUpgrade window
Routine Upgrade every xxx day(s)
If selected, the Smartlink 4020 will check for automatically check for updates at system reload time and on a
periodic basis based on the number of days selected.