Patton electronic 4020 Network Router User Manual


 
Service Access 67
SmartLink 4020 User Manual 7 • System
Service Access
Figure 41. Service Access window
Enable HTTP
When checked access to the web configuration interface (HTTP) of the SmartLink 4020 through the WAN
interface port is enabled.
Note
If the Enable HTTP option is not checked, your WAN service provider will
no longer be able to access the SmartLink 4020 to make
configuration changes.
Enable Ping Reply
When checked, the SmartLink 4020 will reply to ping requests received on the WAN port. If the option is not
checked, the SmartLink 4020 will not respond to ping requests received on the WAN port.
Saving your work
When you are finished configuring settings, click the
Save Service Access Settings
button to save the changes.
Localization
The Localization window contains the following sections:
Call Progress Tones (see figure 42 on page 68)
Distinctive Ring Setting (see figure 43 on page 69)
Supplementary Service Keys (see figure 44 on page 71)
Control Timer Values (see figure 46 on page 74)
FXS Port (see figure 47 on page 75)
Ring Setting (see figure 48 on page 75)
FXS Port Polarity (see figure 49 on page 76)
Note
After configuring the sections, click the
Save
button (see figure 49 on
page 76) to save the new configuration.