Filter
Top Products
Setting up the printer 2-3
Setting the Feed Mode
There are two feed modes: peel and no peel (continuous). Peel mode
separates the backing paper from the label. No peel (continuous) mode
prints labels in a continuous strip.
1. From the Printer Setup menu, press or until you see
FEED MODE
2. Press Enter. You see
SUPPLY FEED MODE
NO PEEL NPL
3. Press or to select the mode you need, then press Enter. The
current setting is displayed on the right. The default is No Peel.
4. Press or until you see
RETURN TO PRINTER MENU
5. Press Enter.