Filter
Top Products
11
When printing on non-RFID supplies, you may also see a label with an
overstrike pattern. Do not use that label. When using “overstrike” as the
Error Action, the data prints on the non-RFID label, but there is no data
printed on the RFID label.
Note: The RFID printer pauses while programming the RFID tag.
3. Remove the printed labels. If the printer will be unused for extended periods of
time, we recommend leaving the printhead unlatched.
Menu Changes
Some changes were made to the menu structure for RFID. These menus should
only be accessed by your System Administrator. Refer to the RFIDMP (Multi-
Protocol) Application Notes or the HF (High Frequency) Application Notes available
on our Web site for more information.
RFID Overstrike
Non- RFID Overstrike