Filter
Top Products
About the Scanner
A scanner is optional for the keyboard. For more information
about the scanner or other peripheral devices, refer to their User
Manuals. Use this section to
◆
operate the scanner.
◆
troubleshoot the scanner.
◆
clean the scanner’s window.
◆
configure the scanner. Your ADK script should already be
written to enable and configure the scanner for you.
The scanner must be connected before you can use it. See
"Connecting the Scanner’s Cables" in Chapter 1 for more
information.
Operating the Scanner
CAUTION
Do Not stare into the beam.
To scan a bar code:
1.
Point the scanner at a slight angle to, and approximately four
to eight inches from the bar code symbol.
2.
Press the button on the scanner. When the scanner is in the
stand, it automatically scans any bar codes held in front of
the scanner’s window. Make sure you do not scan data twice
or accidentally scan the wrong data.
C-2
Configuring the System