Filter
Top Products
You can also set the communication values by using the
Keyboard’s Main Menu. The keyboard defaults are 9600 Baud,
8-bit Word Length, 2 Stop Bits, No Parity, and No Flow Control.
1.
Press X on the keyboard within the first two seconds when
the printer/keyboard are turned on to see the Keyboard’s
Main Menu.
2.
Select Setup. Press
L
or
R
until you see
SETUP
l
COM2 (Scanner)
r
3.
Press Enter. You see a list of communication options to
change (Baud Rate, Word Length, Stop Bits, Parity, and Flow
Control).
COM2 (Scanner)
Baud Rate
r
4.
Press Enter to change the Baud Rate. Use
L
or
R
to
scroll through the choices. Press Enter when the Baud Rate
you need appears. Continue through the list for the other
communication settings and make changes if necessary.
C-6
Configuring the System