Filter
Top Products
Using the Remote Switch
The Mobile Work Station’s On/Off switch should be used as a remote switch
to turn the inverter ON or OFF.
To do this:
1. On the inverter’s front panel, set the ON/OFF/REMO switch to OFF or
REMO.
2. Make sure the switch on the electrical panel is OFF.
3. Make sure the orange wires are connected to the Remote Port (on the
inverter) and the RMT Switch on the electrical panel.
Printing
To print supplies from a Monarch printer on the MWS:
1. Turn on the Mobile Work Station’s power supply and turn on the printer.
PRINT MODE
Ready B
2. Press Feed/Cut to calibrate the supply. You are now ready to collect
data and print.
4-8 Power Options
Set to
OFF/REMO