Filter
Top Products
C3646M-C (6/09) 11
You can connect the active receiver to a transmitter such as the TW4001P passive transceiver, TW3001AT active transmitter, and CC3710/
CC3610 UTP cameras. The receiver also has video ribbon cable connectors for connecting to a CM9700 Series matrix. Connect these products
using UTP Cat5e and Cat6 cable for best video performance.
Table B shows the maximum cable distance for video when connecting an active receiver to a TW4001P passive transceiver.
Table C shows the minimum wire gauge for single wire and stranded wire.
Figure 6 shows a wire assembly cable (part #WA01-5104-005AG) connecting four cameras to a CM9700UTP32A. Refer to Figure 5 and Table A
for the RJ-45 pin designations.
Figure 6. Using the Wire Assembly Cables
Table B. Cable Distance with TW4001P
Cable
Type
Maximum Distance
(video only)
Cat5 3,000 ft (914 m)
Cat5e 4,000 ft (1,219 m)
Cat6 4,000 ft (1,219 m)
Table C. Wire Gauge
Wire Gauge (minimum allowable)
Single wire (solid) 24 AWG (0.25 mm
2
)
Stranded wire
(flexible)
24 AWG (1.0 mm
2
)
TO MXB
1-4 5-8 9-12 13-16
17-20 21-24 25-28 29-32
100-240 VAC 50-60Hz 75A
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1617 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
CM9700-UTP32A
1-4
WIRE
ASSEMBLY
CABLE
CAMERA 1
FIXED CAMERA
TW4001P
WHITE/ORANGE
ORANGE
CAMERA 2
VC-UTP
BOARD
WHITE/GREEN
GREEN
SPECTRA
®
CAMERA 3
CAMCLOSURE
BLUE
WIRE = +
GRAY
WIRE
= -
BLUE
WHITE/BLUE
CAMERA 4
CC3610/CC3710
SERIES CAMERA
PIN 4 -
PIN 5 +
8 PINS (4-/5+)
10 PINS (5-/6+)
BROWN
WHITE/BROWN