Filter
Top Products
8 C2623M (2/07)
• Designed to meet NEMA TS 2 and Caltrans traffic signal control equipment standards for
ambient operating temperature, mechanical shock and vibration, humidity with condensation,
high-line/low-line voltage conditions, and transient voltage protection
NOTE: Conformal coating is required for operation in environments with relative humidity
above 95 percent (condensing).
• No performance adjustments required
• 12 VDC or 24 VAC power supply
• Stand-alone and rack-mountable modular design
• LED indicators for monitoring of optic signal/laser status, 100BASE-FX port status including far
end fault indication (FEFI), 10BASE-T/100BASE-TX port status, and operating power
MODELS
The FT82041 and FR82041 modules consist of the following series of models:
Multimode Models
*
FT82041MSTR-1 Unmanaged Ethernet switch, four 10BASE-T/100BASE-TX ports, one multimode
ST fiber port, one fiber, fiber optic compatibity with FR82041MSTR-1 and other
multimode ST Pelco Ethernet devices that support WDM
FR82041MSTR-1 Unmanaged Ethernet switch, four 10BASE-T/100BASE-TX ports, one multimode
ST fiber port, one fiber, fiber optic compatibility with FT82041MSTR-1 and other
multimode ST Pelco Ethernet devices that support WDM
FT82041MSCR-1 Unmanaged Ethernet switch, four 10BASE-T/100BASE-TX ports, one multimode
SC fiber port, one fiber, fiber optic compatibility with FR82041MSCR-1 and other
multimode SC Pelco Ethernet devices that support WDM
FR82041MSCR-1 Unmanaged Ethernet switch, four 10BASE-T/100BASE-TX ports, one multimode
SC fiber port, one fiber, fiber optic compatibility with FT82041MSCR-1 and other
multimode SC Pelco Ethernet devices that support WDM
Single-Mode Models
*†
FT82041SSTR-1 Unmanaged Ethernet switch, four 10BASE-T/100BASE-TX ports, one single-
mode ST fiber port, one fiber, fiber optic compatibility with FT82041MSCR-1 and
other single-mode ST Pelco Ethernet devices that support WDM
FR82041SSTR-1 Unmanaged Ethernet switch, four 10BASE-T/100BASE-TX ports, one single-
mode ST fiber port, one fiber, fiber optic compatibility with FT82041SSTR-1 and
other single-mode ST Pelco Ethernet devices that support WDM
FT82041SSCR-1 Unmanaged Ethernet switch, four 10BASE-T/100BASE-TX ports, one single-
mode SC fiber port, one fiber, fiber optic compatibility with FR82041SSCR-1 and
other single-mode SC Pelco Ethernet devices that support WDM
FR82041SSCR-1 Unmanaged Ethernet switch, four 10BASE-T/100BASE-TX ports, one single-
mode SC fiber port, one fiber, fiber optic compatibility with FT82041SSCR-1 and
other single-mode SC Pelco Ethernet devices that support WDM
*
For conformal coated models, replace the first letter F in the model number with the letter C.
The conformal coated version of FT82041MSTR-1, for example, is CT82041MSTR-1.
†
Single-mode FC connector is available upon request. Contact the factory for additional information.