Filter
Top Products
12 C2604M (7/06)
Installation
PACKAGE CONTENTS
The following items are supplied:
1
FT85011A transmitter or FR85011A receiver
1 Regulated switching power supply with four plug adapters (North American, Australian, U.K.,
and European configurations); 100-240 VAC, 50-60 Hz input, 12 VDC output
1Wall clip with two 4-40 x 0.250-inch Phillips pan head screws with lock washers (for attach-
ment of single module to wall)
1 FT85011A/FR85011A Fiber Transmitter and Receiver Installation manual (this manual)
DATA COMMUNICATION SETUP
NOTE:
As a matter of convenience, it is recommended that you set the desired data communication
before mounting the FT85011A transmitter/FR85011A receiver into a rack or onto a wall.
The Data Selection switch, which is located on the rear panel of the FT85011A transmitter/FR85011A
receiver, is a 10-position rotary switch that allows you to set the data communication required for the
transfer of data (refer to Figure 4).
Figure 4.
Data Selection Switch
1
2
3
4
5
6
7
8
GND
DATA
SELECTION
SWITCH
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
C2604M.book Page 12 Friday, July 14, 2006 1:08 PM