Filter
Top Products
16 C2604M (7/06)
CONNECTIONS
Connections to the FT85011A transmitter and the FR85011A receiver are made on the rear panel of
the modules and consist of the following:
•
Power connection
NOTES:
–
A 12 VDC or 24 VAC power supply can be used to power the transmitter/receiver when
used as a stand-alone module. A 12 VDC power supply is provided. If a 24 VAC power
supply is used, the power supply must be a Listed Direct Plug-In Power Unit marked as
Class 2 and rated as 24 VAC, 300 mA (minimum output).
–
In extreme temperature conditions, it is recommended that an industrial-rated outdoor
power supply such as the Pelco WCS1-4 power supply be used.
•
Fiber connection
•
Data connection
•
Video input connection (transmitter only)
•
Video output connection (receiver only)
Figure 6 provides an illustration of FT85011A transmitter/FR85011A receiver connections.
Figure 6.
FT85011A Transmitter/FR85011A Receiver Connections
1
2
3
4
5
6
7
8
GND
POWER/ALARM CONNECTION
FOR RACK-MOUNTED MODULE
POWER CONNECTION
FOR STAND-ALONE MODULE
FIBER OPTIC CABLE
COAXIAL CABLE
DATA COMMUNICATION
CABLE (REFER TO TABLE B
FOR DATA CONNECTOR
PIN ASSIGNMENTS AND TO
FIGURES 7-12 FOR WIRING
DIAGRAMS)
0
1
2
3
4
5
6
7
8
9
C2604M.book Page 16 Friday, July 14, 2006 1:08 PM