Pelco FR85011A Network Hardware User Manual


 
C2604M (7/06) 27
Specifications
VIDEO
Number of Channels 1
Modulation Type Pulse code modulation, 8-bit resolution
Video Input (FT85011A)/ 1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM
Video Output (FR85011A)
Bandwidth 6.5 MHz
Gain Unity
Differential Gain <2%
Differential Phase <1°
Tilt <1%
Signal-to-Noise Ratio >60 dB (CCIR weighted)
DATA
Number of Channels 1
Data Communication RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester, Bi-Phase,
Coaxitron
Maximum Baud Rate 500 kbps
GENERAL
Operating Temperature -40° to 167°F (-40° to 75°C)
Input Power Requirements 12 VDC or 24 VAC, 300 mA
LED Indicators Power
Video Present
Optic Fault
Data Tx
Data Rx
Dimensions 8.75" D x 1.08" W x 4.81" H
22.23 x 2.74 x 12.22 cm
Unit Weight 1.48 lb (0.67 kg)
MECHANICAL
Connectors
Video BNC
Rack Power/Alarm 4-pin connector
Stand-Alone Power 2-pin connector, screw terminal
Data 9-pin connector, screw terminal
Fiber Optic ST for multimode fiber
ST or FC for single-mode fiber
C2604M.book Page 27 Friday, July 14, 2006 1:08 PM