Filter
Top Products
18 C2938M (12/06)
REMOTE CONTROL FUNCTIONS
Figure 16.
Remote Control Functions
1.
MUTE:
Turns on/off sound.
2.
POWER:
Switches the monitor from standby mode to on, and back to standby mode.
3.
LOCATE:
Selects a location for the subpicture. Available in PIP (picture-in-picture) mode only.
4.
SIZE:
Selects a size for the subpicture. Available in PIP mode only.
5.
SWAP:
Switches the main picture and subpicture. Available in PIP and PBP modes only. (PBP is picture-by-picture, which is two images of
the same size side by side on the screen.)