Pelco PMCP650 Computer Monitor User Manual


 
C2938M (12/06) 33
PICTURE IS DISTORED WITH ABNORMAL PATTERNS
Possible cause: The signal cable is not connected properly.
Remedy: Make sure the signal cable is attached firmly to the back of the monitor, and from the source.
Possible cause: The input signal is beyond the monitor’s capabilities.
Remedy: Check the video signal source to see if it is beyond the monitor’s range. Verify the signal source’s specifications with the monitor’s
specifications.
DISPLAY IMAGE DOES NOT FILL THE SCREEN COMPLETELY
Possible cause: Under RGB mode, the H-Size and V-Size are set incorrectly.
Remedy: Use H-Size and V-Size to adjust the video size.
Possible cause: Under AV1, AV2, or Component with 480i input, the 4:3 Wide mode is switched on.
Remedy: Use the WIDE button to scroll through the various full screen modes.
SOUND BUT NO PICTURE
Possible cause: Improperly connected source signal cable.
Remedy: Make sure both video inputs and sound inputs are correctly connected.
PICTURE BUT NO SOUND
Possible cause: Improperly connected source signal cable.
Remedy: Make sure both video inputs and sound inputs are correctly connected.
Possible cause: Volume is turned all the way down.
Remedy: Use VOL +/- to hear sound.
Possible cause: Mute is turned on.
Remedy: Use the MUTE button to switch off mute.