Filter
Top Products
C2938M (12/06) 25
MINIMIZING SCREEN STICKING USING PIXEL SHIFT
A difference in brightness can occur around dark or bright areas. This is due to deterioration in the fluorescent substance used in the plasma
display if a fixed pattern is displayed for a long period of time; this is image sticking. A feature is built in to shift the pixels enough to reduce the
chance of burning an image onto the screen. You can turn this feature on or off.
NOTE: This feature is disabled when DVI input is selected.
1. Press the MENU button on the front panel or the remote control.
2. Press the VOL+ or VOL- button to select Screen.
3. Press the button to enter the selected menu group.
4. Press the or button to select Pixel Shift (refer to Figure 26).
5. Press the VOL+ or VOL- button to select the desired option (OFF or ON).
Figure 26. Pixel Shift
FREEZING CURRENT PICTURE
You can freeze the picture when watching video.
1. Press the MENU button on the front panel or the remote control.
2. Press the VOL+ or VOL- button to select Screen.
3. Press the button to enter the selected menu group (refer to Figure 27).
4. Press the or button to select Freeze.
5. Press the VOL+ or VOL- button to select the desired option (OFF or ON).
You can also freeze the current picture by pushing Freeze on the remote control. Press it again to return to normal viewing.
Figure 27. Freeze Picture