Filter
Top Products
20 C2938M (12/06)
BASIC FUNCTIONS
POWERING ON/OFF
Make sure the monitor is plugged into the wall outlet with the supplied power cord. The STATUS LED on the control panel will glow red.
1. Press the on/off button on the front panel or the POWER button on the remote control. The monitor will turn on after a brief pause.
The STATUS LED will turn green to indicate power is on.
2. Turn off the power by again pressing the on/off button on the front panel or the POWER button on the remote control.
SELECTING SIGNAL SOURCE
1. Press the INPUT button on the front panel or the remote control.
2. Press the
or
button to cycle the monitor through the available input signal sources in the following order:
VIDEO1>VIDEO2>VIDEO>S-VIDEO>COMPONENT>RGB>DVI (refer to Figure 17).
3. Press the VOL+ or VOL- button to select the source.
Figure 17.
Main Input Menu
ADJUSTING/MUTING VOLUME
Adjust the volume up or down using the volume button on either the remote control or the front panel.
MUTING VOLUME USING REMOTE CONTROL
1. Press the MUTE button on the remote control to silence the audio.
2. Press the MUTE, VOL+, or VOL- button to restore the audio.
DISPLAYING INFORMATION
Press the RECALL button to display the channel information and the setting status. Press RECALL again to exit. The displayed information can
differ depending on the selected source.