Filter
Top Products
Pelco Manual C360M-I (11/99) 3
IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following WARNINGS should be observed.
1. Installation and servicing should only be done by qualified service personnel and con-
form to all local codes.
2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X ,6 or 6P enclo-
sure, it is designed for indoor use only and it must not be installed where exposed to
rain and moisture.
3. The camera and lens combined weight shall not exceed 50 pounds (23 kg).
4. Only use replacement parts recommended by Pelco.
5. After replacement/repair of this unit’s electrical components, conduct a resistance
measurement between line and exposed parts to verify the exposed parts have not
been connected to line circuitry.
6. Use only installation methods and materials capable of supporting four times the com-
bined weight of the enclosure, scanner, camera, and lens.
The product and/or manual may bear the following marks:
Please thoroughly familiarize yourself with the information in this manual prior to installation
and operation.
DESCRIPTION
The PS30A and PS30-24 are medium-duty indoor/outdoor scanners, constructed to oper-
ate with loads up to 50 pounds (23 kg). These scanners are equipped with a high-torque AC
motor, in either 24 VAC or 120 VAC, with adjustable heavy-duty worm gear final drives that
eliminate backlash and drifting. They are designed to allow only the CCTV enclosure and
the mounting plate to rotate, resulting in a smoother, more reliable scanner.
You can wire the unit to scan left and right continuously or manually.
MODELS
PS30A Medium-duty scanner, 120 VAC
PS30-24 Medium-duty scanner, 24 VAC
INSTALLATION
MOUNTING
1. The PS30A and PS30-24 can be mounted upright or inverted. Attach the scanner to a
flat surface with four bolts. If you use a wall, ceiling, or pedestal mount, follow the instruc-
tions that are provided with the mount. Make sure the mounting surface can support four
times the combined weight of the scanner plus the camera and lens, or enclosure, cam-
era, and lens. The scanner weighs 11 pounds (5 kg). Refer to the manuals for your en-
closure, camera, and lens for the weights of those units. The weight of the camera and
lens, or enclosure, camera, and lens must not exceed 50 pounds (23 kg).
This symbol indicates that dangerous volt-
age constituting a risk of electric shock is
present within this unit.
This symbol indicates that there are impor-
tant operating and maintenance instructions
in the literature accompanying this unit.
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION:
The
scanners are de-
signed to operate
in an upright or inverted
position only. Do not mount
the scanners horizontally.