Perle Systems p2600 Network Router User Manual


 
Event Logs
45
Generated when a client declines an address offered by the DHCP service, usually because the client has found from
some other source that the address is unavailable.
DHCP services – release. <IP address> released.
Generated when IP address displayed is released from its assignment to a device and put back in the IP pool for re-
assignment.
Error executing: XXXXXX
Generated when an error is detected loading back a configuration. The invalid command is specified.
Idle timeout expired, disconected
ISDN link has had no traffic for longer than specified by the idle timer and has been disconnected.
Incorrect password from <IP address>
Generated when an incorrect password is given for a Telnet connection. The connecting bridge/router’s
name or IP address is specified. After three incorrect login attempts within ten minutes, an alarm is generated
(see Security alarms: “Possible intruder”) and any further attempts from that IP address within the next ten
minutes are rejected.
Invalid Relay Destination for subnetted network
Generated when a device attempts to do a network broadcast on a subnetted network.
IPX: Network configuration error from X, network Y.
Generated when the router and server do not agree on a network number.
IPX: routing table full
Generated when the IPX RIP table has been filled. Any new RIP frames received will be discarded.
IPX: Service table full
Generated when the IPX SAP table has been filled. Any new SAP frames received will be discarded.
IPX: X, unknown RIP packet type received
Generated when the device receives an invalid RIP packet.
IPX: X, unknown SAP packet type received
Generated when the device receives an invalid SAP packet.
IPX: X, demand RIP failed
Generated when this device reaches the end of the attempts to negotiate demand RIP for the IPXCP
connection. After demand RIP has failed, the normal RIP and SAP updates will occur.
LCP X authenticating peer with CHAP
Generated when this device is using CHAP to authenticate the peer (remote) device.
LCP X authenticating peer with PAP
Generated when this device is using PAP to authenticate the peer (remote) device.