Philips 200p7 Computer Monitor User Manual


 
Product Information
How to enable SmartImage
1. Press to launch the SmartImage on screen display;
2. Keep press to toggle between Office Work, Internet, Image Viewing, Video Playback, Custom, and Off;
3. The SmartImage on screen display will remain on screen for 3 seconds or you can also press “OK“ to make
confirmation.
Except using
key to scroll down, you can also press buttons to choose and press “ok” to confirm selection
and close the SmartImage OSD.
There are six modes to be selected:
1. Office Work: Select this mode for general office application, like word processing, spreadsheet, and email. The
screen is dominated by text.
2. Internet: Select this mode for Internet application, especially web browsing. The screen is mixed by text and
picture.
3. Image Viewing: Select this mode for image viewing application, especially in slid show. The screen is
dominated by picture.
4. Video Playback: Select this mode for video application, like Microsoft Media Player or Real Player. The screen
is dominated by video.
5. Custom: Select this mode for you to adjust the rate of luminance, contrast gap, color boost, sharpness, and
text enhancement by yourself.
Press to enter sub-
menu selections
Press to toggle
between
Exit
Luminance
Contrast Gap
Color Boost
Sharpness
Text Enhancement
Reset
to adjacent sub-
menu selections
Then, press "OK" to go
back to sub-menu and
SmartImage OSD.
6. Off: No optimization by SmartImage.
file:///D|/My%20Documents/dfu/200P7/english/200p7/product/product.htm (2 of 11)2006-12-11 1:16:33 PM