Filter
Top Products
10
2. Setting up the monito
r
[PIP]: Picture in Picture
Open up a sub-window of
another signal source.
B
A
(main)
When the sub source is not
detected:
B
A
(main)
[PBP]: Picture by Picture
Open up a sub-window side-
by-side of another signal
source.
A (main) B
When the sub source is not
detected:
A (main) B
Note
The black strip shows on the top and the
bottom of the screen for the correct aspect
ratio when in the PBP mode.
PIP / PBP Input: There are four different
video input to choose as the sub display
source: [VGA],[DVI], [MHL-HDMI], and
[DisplayPort].
Please refer below table for compatibility of
main/sub input source.
SUB SOURCE POSSIBILITY (xl)
Inputs
VGA DP DVI
MHL-
HDMI
MAIN
SOURCE
(xl)
VGA ʁʁ ʁ
DP ʁʁʁ
DVI ʁʁ ʁ
MHL-
HDMI
ʁʁʁ
PIP Size: When PIP is activated, there are
three sub-window sizes to choose: [Small],
[Middle], [Large].
B
A
(main)
Small
Middle
Large
PIP Position: When PIP is activated, there
are four sub-window positions to choose.
Top-Left Top-Right
B
A
(main)
B
A
(main)
Bottom-Left Bottom-Right
B
A
(main)
A (main)
B
Swap: The main picture source and the sub
picture source swapped on the display.
Swap A and B source in [PIP] mode:
B
A
(main)
Ƚ
A
B
(main)
Swap A and B source in [PBP] mode:
A (main) B
Ƚ
B (main) A