Filter
Top Products
User Manual BDS4222B/V/R
21
6. BASIC FUNCTIONS
6.1 POWERING ON / OFF
Make sure the monitor is plugged into the wall outlet and the main AC
switch located in the rear of the monitor is switched to ON position.
If the power is plugged in and the AC switch is on, the STATUS LED will
illuminate in orange color.
Using Front Panel or Remote Control
1 Press the POWER key on the monitor panel or the remote control.
=> The monitor will now turn on after a brief pause. The STATUS
LED will now turn green to indicate power on status.
2 Turn off the power by pressing the POWER key on the front panel
or the remote control again.
6.2 SELECTING SIGNAL SOURCE
Using Front Panel or Remote Control
1 Press the INPUT key on the monitor panel or the AV key on the
remote control.
2 Pressing the INPUT or AV key will cycle the monitor through all
available input signal sources in the following order:
AV3 S-VIDEO
DVI
VGA COMPONENT
TV
AVI
AV2