Filter
Top Products
User Manual BDS4222B/V/R
42
7.9.2 MANUAL CHANNEL SEARCH
You may also make a manual search, in case, some channels are not
stored during the initial set up.
1 Press the MENU key on the monitor panel or remote control.
2 Use the ADJ or ADJ key to select the TV option from the
menu.
3 Use the SEL or SEL key to select the MANUAL SEARCH
option.
4 Press the ADJ or ADJ key to confirm the selection.
=> The MANUAL SEARCH menu is now displayed.
5 Select the Standard option.
6 Select the signal system then use the ADJ or ADJ key to
search the frequency based on the current frequency shown on the
menu. Or you can just key in the frequency with number key on the
remote control.
=> When a channel is found, the Save on CH option will be flashing
with red color.
7 Press OK key to confirm the channel which is searched.