Filter
Top Products
User Manual BDS4622V/R and BDS4624R
40
8.2.2 INSTALLATION
Connect to antenna
When using 75 Ohm coaxial cable: Connect directly to the VHF/UHF
terminal of the tuner.
Input and Output Connection
VHF/UHF: Connect antenna or CATV 75 Ohm coaxial cable to receive
TV/CATV signal.
8.2.3 BASIC OPERATION
Channel Scan and Memory
When the hardware installation is completed, you must proceed the
channels scan first. The operation procedure is as below:
1. Select TV input (2 options)
● Press the INPUT button on the remote controller continuously,
and select in sequence.
Scart 1--> Scart 2--> AV--> Component--> DVI--> TV.
● Press the VIDEO button on the remote control repeatedly,
the system will detect and switch the input signals sequentially by
the cycle : Scart 1--> Scart 2--> AV--> Component-->TV.
2. Channel scan and memory
1 Press the MENU on the remote control or the front panel of the
monitor.
2 Select TV Settings.
3 Press the PR or PR button to select.
4 Press the VOL- or VOL+ button to execute.
5 Press the PR or PR button to move to the Auto Install icon.
6 Press the VOL- or VOL+ button for channel scanning
(figure as beside).
The system will automatically scan the whole frequency range (band
VHF L; VHF H; UHF) and memorize the valid channels.
Note:
During this procedure, other functions will be inactive.
1 Press the EXIT button to stop scanning.
2 After scanning use the PR or PR button at the font panel, or
number keys on the remote control, to select your favorite
program.
VHF/UHF terminal
Inser
t