Filter
Top Products
User Manual BDS4622V/R and BDS4624R
43
B) PIP / POP Settings
1 Press the PIP/POP button of the remote controller to enter the
PIP/POP mode.
2 Press the PIP/POP button repeatedly to cycle through the following
options:
PIP(Small)--> PIP(Medium)--> PIP(Large)--> POP-->
POP(16:9) --> Multi POP--> Off
Change source of input signal for PIP screen (Input)
1 Press the INPUT button of the PIP/POP area to change the input
signal for PIP
2 Press this button repeatedly and PIP will cycle according to the signal
to be displayed.
3 Press the Input button of the PIP/POP area to change the POP input
signal directly.
PIP TV Channel Select (PR+ / PR-)
1 When the PIP screen is ON, press the PR+ button of the PIP area to
adjust PIP to number-up channel.
2 Press the PR- button for adjusting to a smaller-number channel.
PIP/POP Exchange (SWAP)
When the PIP/POP screen is ON, press the SWAP button for exchange
of PIP/POP screens.
Change PIP size under PIP Mode
When PIP/POP is ON and under PIP Mode, press MENU button to
enter the PIP Size Selection on Display page, and select the PIP size such
as Large, Medium, Small, or directly press PIP/POP Key on remote
controller to change PIP size.
Change PIP position under PIP Mode
When PIP/POP is ON and under PIP Mode, press the MENU button to
enter the PIP Position Selection on Display page, press Up, Down, Right,
Left to change PIP position, or under status of OSD not actuated.