Filter
Top Products
User Manual BDS4622V/R and BDS4624R
41
8.2.4 OSD FUNCTIONS
A)TV Settings
1 Press MENU.
2 Press the PR or PR button to Select.
3 Press the VOL- or VOL+ button to Execute, then the TV Settings
will come out as the left figure below.
Auto Install
There are 3 systems: Europe; France and All Region.
1 Select Auto Install row.
2 Press the VOL+ button to enter the select system.
3 Press the ENTER button to start the channel scanning.
The OSD menu will change into Channel Search.
Upon completion of the channel scan it will stay on the channel where
the auto process started.
The active channels are stored into the channel memory.
4 Press the PR or PR button to select channel in sequence.
5 Press the EXIT button to stop searching.
Manual Search
1 Press the VOL+ button to set up TV Channels manually.
Fine Tune
1 Fine tune range cover -5 ~ +5 MHz of the currently displayed
program channel, 62.5 khz per step.
2 Press the VOL- or VOL+ button to adjust the frequency.
Skip
Processing channel adding and erasing from tuner memory.
Select the channel first, then press the VOL- or VOL+ button to select
"On" for channel erasing or "Off" for channel adding.
Note:
To erase a channel from the memory you must select a channel with the
numeric keys only, not by the PR or PR button.