Filter
Top Products
A. Introduction
CRA01/00 is a Loop-Through (LT) interface card designed to support VGA content connectivity
and RS232 control in daisy chain configurations on select Philips SmartCard-enabled displays.
Please refer to the product leaflet for the detailed feature specifications.
This guide will provide the basic steps for installing the LT card into a Philips SmartCard-enabled
display.
B. Package Contents
Your CRA01/00 package should contain the following:
1 x LT card module
1 x LT card cap (see Fig. 1 below)
1 x VGA cable (30cm/ 11.811”)
1 x RS232 cable (20cm/ 7.874”)
Installation Guide (this document)
Global Warranty Card
Fig. 1 – LT card cap
C. Brief Electrical Specifications
Supply Voltage: 12V +/- 10%
Supply Current: 0.12A (Nominal)
Power Consumption: 1.44 W (Nominal)
Page 2 of 9 LT Installation Guide 1.1 (140907)
12NC: 3139 125 39281