Filter
Top Products
7. Insert the LT card into the SmartCard slot as shown below. Ensure that the card is securely
connected to the internal 32-pin socket.
8. Secure the LT card to the display by re-fastening the screws that were removed in step 4.
Screws to be fastened
9. Use the included VGA cable to connect the VGA Local on the LT card to the VGA In on the
display as shown.
10. Use the included RS232 cable to connect the RS232 Local on the LT card and the RS232 In
on the display as shown.
Page 5 of 9 LT Installation Guide 1.1 (140907)
12NC: 3139 125 39281