Filter
Top Products
18 Philips · IPF 520 · 525 · 555
EN
Switch on forwarding
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [
TAD SET-UP.
3 Confirm with o.
ICM ON SPEAKER appears on the
display.
4 Using [ select
FORWARD MSGS.
5 Confirm with o.
6 Use [ to select from the following settings:
OFF—No forwarding
ONE TIME—No forwarding
DAILY—Daily forwarding
7 Confirm with o.
8 Using the numeric keys, enter the time at which the
forwarding is to take place.
9 Confirm with o.
10Enter the telephone number to which the received mes-
sages are to be forwarded.
11Confirm with o.
12You can exit with j.
Modifying the Settings
Switching Eavesdropping on/off
You can select whether the caller is to be heard when leav-
ing a message or not.
1 Press MENU.
RECEPT. SET-UP appears on the
display.
2 Select using [
TAD SET-UP.
3 Confirm
ICM ON SPEAKER with o.
4 Using [ select whether the loudspeakers should be
switched on /off when the answering machine is
switched on.
5 Confirm with o.
6 You can exit with j.
Setting the Recording Duration
You can limit the length of the incoming messages and
internal memos.
1 Press MENU.
RECEPT. SET-UP appears on the
display.
2 Select using [
TAD SET-UP.
3 Confirm with o.
ICM ON SPEAKER appears on the
display.
4 Using [ select
ICM REC.TIME.
5 Confirm with o.
6 Select the desired recording duration using [.
7 Confirm with o.
8 You can exit with j.
Economy Operating Mode
With this function you can identify whether new messages
have been recorded or not from the number of rings. If the
device picks up after the set number of rings, you have
received new messages. If no new messages have been
received, the answering machine switches on after two
more rings than the setting if no new messages have been
received. You can terminate the remote access without
incurring any telephone costs.
1 Press MENU.
RECEPT. SET-UP appears on the
display.
2 Select using [
TAD SET-UP.
3 Confirm with o.
ICM ON SPEAKER appears on the
display.
4 Using [ select
TOLL SAVER.
5 Confirm with o.
6 Switch the function on/off using [.
7 Confirm with o.
8 You can exit with j.
Printing the answering machine
settings
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [
TAD SET-UP.
3 Confirm with o.
ICM ON SPEAKER appears on the
display.
4 Using [ select
PRINT SET-UP.
5 Confirm with o.
6 Using [ select whether you would like to have a
printout.
7 Confirm with o.
Notice
Modifying or Printing Settings
If you already done settings, confirm
ALREADY ENTERED using o. Use [ to
select whether you would like to modify or
delete the settings.