Filter
Top Products
12 User manual
Charging directly through the 3.4.3
SpeechMike
The rechargeable Philips batteries LFH9154
can be charged in the SpeechMike by directly
connecting the AC charger to the SpeechMike.
Plug the charger into a wall outlet and 1
connect the charger cable to the charger
connector of the SpeechMike.
Learn about the battery charge 3.5
level
Immediately after turning the SpeechMike on or
when the SpeechMike is placed in the docking
station, the battery charge level indicator light
will indicate the battery status.
Battery charge
level indicator
Battery status
Green 30% or more of charge
remaining
Orange Less than 30% of charge
remaining
Red Less than 10% of charge
remaining
The battery charge level indicator will
continuously flash red with about 30 seconds of
recording time remaining.
Charging using the docking station 3.4.2
and the USB cable
The rechargeable Philips batteries LFH9154 can
be charged in the SpeechMike using the docking
station in combination with the USB cable.
Ensure that the docking station is connected 1
to the computer using the USB cable (see
chapter 3.2 for more information).
Insert the SpeechMike into the docking slot 2
of the docking station and press it down
firmly until it locks.
The battery level charge indicator flashes •
orange during charging.
The battery level charge indicator glows green •
when charging is complete.
D Notes
The computer must be switched on when •
charging the batteries with the USB cable.
If the USB port of the computer does not •
supply enough power supply capacity, use the
AC charger.